PLANET WGSW-52040 - Manual (Page 356)

20-125
Chapter 20 Commands for QoS
20.1 accounting
Command:
accounting
no accounting
Function:
Set statistic function for the classified traffic.
Parameter:
None.
Command mode:
Policy map configuration mode
Default:
Do not set statistic function.
Usage Guide:
After enable this function, add statistic function to the traffic of the policy class map. In single bucket mode, the
messages can be only red or green when passing policy. When printing the information, in-profile means green and
out-profile means red; In dual bucket mode, there are three colors(green, yellow, red) of messages. in-profile means
green, out-profile means red and yellow.
Example:
Count the packets which satisfy c1 rule.
Switch(config)#policy-map p1
Switch(Config-PolicyMap-p1)#class c1
Switch(Config-PolicyMap-p1-Class-c1)#accounting
Switch(Config-PolicyMap-p1-Class-c1)#exit
Switch(Config-PolicyMap-p1)#exit
20.2 class
Command: