PLANET WGSW-52040 - Manual (Page 566)

35-106
Enable the IGMP Snooping function for the specified VLAN; the “no ip igmp snooping vlan <vlan-id>” command
disables the IGMP Snooping function for the specified VLAN.
Parameter:
<vlan-id> is the VLAN number.
Command mode:
Global Mode
Default:
IGMP Snooping is disabled by default.
Usage Guide:
To configure IGMP Snooping on specified VLAN, the global IGMP Snooping should be first enabled. Disable IGMP
Snooping on specified VLAN with the “no ip igmp snooping vlan <vlan-id>” command.
Example:
Enable IGMP Snooping for VLAN 100 in Global Mode.
Switch(config)#ip igmp snooping vlan 100
35.2.7 ip igmp snooping vlan immediate-leave
Command:
ip igmp snooping vlan <vlan-id> immediate-leave
no ip igmp snooping vlan <vlan-id> immediate-leave
Function:
Enable the IGMP Snooping fast leave function for the specified VLAN; the “no ip igmp snooping vlan <vlan-id>
immediate-leave” command disables the IGMP Snooping fast leave function.
Parameter:
<vlan-id> is the VLAN number specified.
Command mode:
Global Mode