PLANET WGSW-52040 - Manual (Page 635)

39-175
Usage Guide:
When users who passed the certification according to mac changed among different ports, delete the user for the
new certification. The command should be enable to delete the user.
Example:
When the dot1x certification according to mac is down, delete the user who passed the certification of the port
.
Switch(config)#dot1x macbased port-down-flush
39.12 dot1x max-req
Command:
dot1x max-req <count>
no dot1x max-req
Function:
Sets the number of EAP request/MD5 frame to be sent before the switch re-initials authentication on no supplicant
response; the “no dot1x max-req” command restores the default setting.
Parameters:
<count> is the times to re-transfer EAP request/ MD5 frames, the valid range is 1 to 10.
Command mode:
Global Mode.
Default:
The default maximum for retransmission is 2.
Usage Guide:
The default value is recommended in setting the EAP request/ MD5 retransmission times.
Example:
Changing the maximum retransmission times for EAP request/ MD5 frames to 5 times.
Switch(config)#dot1x max-req 5