PLANET WGSW-52040 - Manual (Page 156)

4-155
Example:
Test the link status of the twisted pair connected to the 1000M port 1/25.
Switch#virtual-cable-test interface ethernet 1/25
Interface Ethernet1/25:
--------------------------------------------------------------------------
Cable pairs Cable status Error length (meters)
--------------- ----------------- --------------------------
(1, 2) open 5
(3, 6) open 5
(4, 5) open 5
(7, 8) short 5
4.1.18 switchport discard packet
Command：
switchport discard packet { all | untag }
no switchport discard packet { all | untag }
Function：
Configure the port not to receive any packet or untag; the no command cancel the restriction of discard, it means the
port is allowed to receive any packet or untag.
Parameters：
all means it does not receive any packet including untag, tag and the deal packet. untag means it does not receive
untag.
Command Mode：
Port Mode
Default：
The default does not have the restriction.
Usage Guide：
This command is not suggested to be configured only if there is the special requirement.
Example：
Configure the port of 1/8 not to receive all packets.