PLANET WGSW-52040 - Manual (Page 410)

23-21
Codes: K - kernel route, C -
connected, S - static, R - RIP, O -
OSPF,I - IS-IS, B - BGP > - selected
route, * - FIB route, p - stale info
Abbreviation display sign of every entry
S 2009:1::/64 via
fe80::250:baff:fef2:a4f4, Vlan1
1024
The static router in FIB table, of which the destination
network segment is 2002::/64, via means passing
fe80::250:baff:fef2:a4f4 is the next hop, VLAN1 is the exit
interface name, 1024 is router weight.
23.2.20 show ipv6 neighbors
Command:
show ipv6 neighbors [{vlan|ethernet} interface-number | interface-name | address <ipv6address>]
Function:
Display neighbor table entry information.
Parameter:
Parameter {vlan|ethernet} interface-number|interface-name specify the lookup based on interface. Parameter
ipv6-address specifies the lookup based on IPv6 address. It displays the whole neighbor table entry if without
parameter.
Default Situation:
None
Command Mode:
Admin and Configuration Mode
Example:
Switch#show ipv6 neighbors
IPv6 neighbour unicast items: 14, valid: 11, matched: 11, incomplete: 0, delayed: 0,
manage items 5
IPv6 Address Hardware Addr Interface Port State
2002:ca60:c801:1:250:baff:fef2:a4f4 00-50-ba-f2-a4-f4 Vlan1 Ethernet1/2 reachable
3ffe:3240:800d:1::100 00-30-4f-01-27-86 Vlan1 Ethernet1/3 reachable
3ffe:3240:800d:1::8888 00-02-01-00-00-00 Vlan1 Ethernet1/1 permanent
3ffe:3240:800d:1:250:baff:fef2:a4f4 00-50-ba-f2-a4-f4 Vlan1 Ethernet1/4 reachable