PLANET WGSW-52040 - Manual (Page 178)

8-177
Usage Guide:
When the debug switch is enabled, users can check the receiving and sending of packets and other information on
the port.
Example:
Enable the debug switch of LLDP function on the switch.
Switch#debug lldp packets interface ethernet 1/1
%Jan 01 00:02:40 2006 LLDP-PDU-TX PORT= ethernet 1/1
8.4 lldp enable
Command:
lldp enable
lldp disable
Function:
Globally enable LLDP function; disable command globally disables LLDP function.
Parameters:
None.
Default:
Disable LLDP function.
Command Mode:
Global Mode.
Usage Guide:
If LLDP function is globally enabled, it will be enabled on every port.
Example:
Enable LLDP function on the switch.
Switch(config)#lldp enable
8.5 lldp enable (Port)
Command:
lldp enable