PLANET WGSW-52040 - Manual (Page 395)

23-6
23.2.5 debug ipv6 packet
Command:
debug ipv6 packet
no debug ipv6 packet
Function:
IPv6 data packets receive/send debug message.
Parameter:
None
Default:
None
Command Mode:
Admin Mode
Example:
Switch#debug ipv6 packet
IPv6 PACKET: rcvd, src <fe80::203:fff:fe01:2786>, dst <fe80::1>, size <64>, proto <58>, from Vlan1
Displayed information Explanation
IPv6 PACKET: rcvd Receive IPv6 data report
Src <fe80::203:fff:fe01:2786> Source IPv6 address
Dst <fe80::1> Destination IPv6 address
size <64> Size of data report
proto <58> Protocol field in IPv6 header
from Vlan1 IPv6 data report is collected from Layer 3 port vlan1
23.2.6 debug ipv6 icmp
Command:
debug ipv6 icmp
no debug ipv6 icmp