PLANET WGSW-52040 - Manual (Page 203)

11-202
Parameters:
<IFNAME>: name of the port that the debugging will be enabled or disabled
Command Mode:
Admin mode
Default:
Disable.
Usage Guide:
N/A.
Example:
Enable the debugging of refreshing information for all timers of ethernet1/1.
Switch#debug ethernet-oam timer all interface ethernet1/1
11.6 ethernet-oam
Command:
ethernet-oam
no ethernet-oam
Function:
Enable ethernet-oam of ports, no command disables ethernet-oam of ports.
Parameters:
None.
Command Mode:
Port mode
Default:
Disable.
Usage Guide:
N/A.
Example: