PLANET WGSW-52040 - Manual (Page 757)

51-297
Example:
Enable the debug of DHCPv6 packets.
Switch#debug ipv6 dhcp snooping packet
51.2.4 debug ipv6 nd snooping binding
Command:
debug ipv6 nd snooping binding
no debug ipv6 nd snooping binding
Function:
Enable the binding debug of slaac type for SAVI, no command disables the binding debug.
Parameter:
None.
Command Mode:
Admin Mode.
Default:
None.
Usage Guide:
After enable binding debug, the relative binding of slaac type will create the print information for misarranging. The
no command disables this function.
Example:
Enable binding debug of slaac type.
Switch#debug ipv6 nd snooping binding
51.2.5 debug ipv6 nd snooping event
Command:
debug ipv6 nd snooping event
no debug ipv6 nd snooping event