PLANET WGSW-52040 - Manual (Page 678)

44-218
accounting function.
Command mode:
Global Mode
Default:
AAA accounting is not enabled by default.
Usage Guide:
When accounting is enabled in the switch, accounting will be performed according to the traffic or online time for port
the authenticated user is using. The switch will send an “accounting started” message to the RADIUS accounting
server on starting the accounting, and an accounting packet for the online user to the RADIUS accounting server
every five seconds, and an “accounting stopped” message is sent to the RADIUS accounting server on accounting
end. Note: The switch send the “user offline” message to the RADIUS accounting server only when accounting is
enabled, the “user offline” message will not be sent to the RADIUS authentication server.
Example:
Enabling AAA accounting for the switch.
Switch(config)#aaa-accounting enable
44.3 aaa-accounting update
Command:
aaa-accounting update {enable | disable}
Function:
Enable or disable the AAA update accounting function.
Command Mode:
Global Mode.
Default:
Enable the AAA update accounting function.
Usage Guide:
After the update accounting function is enabled, the switch will sending accounting message to each online user on
time.