PLANET WGSW-52040 - Manual (Page 599)

38-139
Periodic time and date. The definition of period is specific time period of Monday to Saturday and Sunday every
week.
day1 hh:mm:ss To day2 hh:mm:ss or
{[day1+day2+day3+day4+day5+day6+day7]|weekend|weekdays|daily} hh:mm:ss To hh:mm:ss
Examples:
Make configurations effective within the period from9:15:30 to 12:30:00 during Tuesday to Saturday.
Switch(config)#time-range admin_timer
Switch(Config-Time-Range-admin_timer)#absolute-periodic Tuesday 9:15:30 to Saturday 12:30:00
Make configurations effective within the period from 14:30:00 to 16:45:00 on Monday, Wednesday, Friday and
Sunday.
Switch(Config-Time-Range-admin_timer)#periodic Monday Wednesday Friday Sunday 14:30:00 to 16:45:00
38.2 absolute start
Command:
[no] absolute start <start_time> <start_data> [end <end_time> <end_data>]
Functions:
Define an absolute time-range, this time-range operates subject to the clock of this equipment.
Parameters:
start_time : start time, HH:MM:SS (hour: minute: second)
end_time : end time, HH:MM:SS (hour: minute: second)
start_data : start data, the format is, YYYY.MM.DD（year.month.day）
end_data : end data, the format is, YYYY.MM.DD（year.month.day）
Remark: time-range is one minute per time, so the time error shall be <= one minute.
Command Mode:
Time-range mode
Default:
No time-range configuration.
Usage Guide:
Absolute time and date, assign specific year, month, day, hour, minute of the start, shall not configure multiple
absolute time and date, when in repeated configuration, the latter configuration covers the absolute time and date of