PLANET WGSW-52040 - Manual (Page 423)

24-34
prevention. The level of the log is “Warning”.
Example:
Enable ARP scanning prevention log function of the switch.
Switch(config)#anti-arpscan log enable
24.9 anti-arpscan trap enable
Command:
anti-arpscan trap enable
no anti-arpscan trap enable
Function:
Enable ARP scanning prevention SNMP Trap function; ”no anti-arpscan trap enable” command disable ARP
scanning prevention SNMP Trap function.
Parameters:
None.
Default Settings:
Disable ARP scanning prevention SNMP Trap function.
Command Mode:
Global configuration mode
User Guide:
After enabling ARP scanning prevention SNMP Trap function, users will receive Trap message whenever a port is
closed or recovered by ARP scanning prevention, and whenever IP t is closed or recovered by ARP scanning
prevention.
Example:
Enable ARP scanning prevention SNMP Trap function of the switch.
Switch(config)#anti-arpscan trap enable