PLANET WGSW-52040 - Manual (Page 551)

35-91
Chapter 35 IPv4 Multicast Protocol
35.1 Commands for DCSCM
35.1.1 access-list (Multicast Destination Control)
Command:
access-list <6000-7999> {deny|permit} ip {{<source> <source-wildcard>}|{host-source
<source-host-ip>{range<2-65535>|}}|any-source} {{<destination> <destination-wildcard>}|{host-destination
<destination-host-ip>{range<2-255>|}}|any-destination}
no access-list <6000-7999> {deny|permit} ip {{<source> <source-wildcard>}|{host-source
<source-host-ip>{range<2-65535>|}}|any-source} {{<destination> <destination-wildcard>}|{host-destination
<destination-host-ip>{range<2-255>|}}|any-destination}
Function:
Configure destination control multicast access-list, the “no access-list <6000-7999> {deny|permit} ip {{<source>
<source-wildcard>}|{host <source-host-ip>}|any-source} {{<destination>
<destination-wildcard>}|{host-destination <destination-host-ip>}|any-destination}” command deletes the
access-list.
Parameter:
<6000-7999>: destination control access-list number.
{deny|permit}: deny or permit.
<source>: multicast source address.
<source-wildcard>: multicast source address wildcard character..
<source-host-ip>: multicast source host address.
range<2-65535>: the range of source host IP address.
<destination>: multicast destination address.
<destination-wildcard>: multicast destination address wildcard character.
<destination-host-ip>: multicast destination host address
range<2-255>：the range of destination host IP address.
Default:
None
Command Mode:
Global Mode
Usage Guide: