PLANET WGSW-52040 - Manual (Page 463)

29-3
Function:
Clear the address with the conflict record in address conflict log.
Parameter:
<address> is the specified address with the conflict record, no specified address will clear all conflict records.
Command mode:
Admin Mode
Usage Guide:
With show ipv6 dhcp conflict command, the user can check the conflict in which IP addresses. With this command,
the user can clears the conflict record of an address. If no specified address will clear the conflict record of all
addresses in log. After the conflict records are cleared in log, these addresses can be used by DHCPv6 server again.
Example:
When administrator checks the conflict logs, administrator discovers that address 2001::1 with the conflict record is
not used, so its record will be cleared from address conflict files.
Switch#clear ipv6 dhcp conflict 2001::1
29.3 clear ipv6 dhcp statistics
Command:
clear ipv6 dhcp statistics
Function:
Clear the statistic records of DHCPv6 packets, the statistic counter of DHCPv6 packets is cleared.
Parameter:
None.
Command mode:
Admin Mode
Usage Guide:
With show ipv6 dhcp statistics command, the user can check the statistic information of the counter for DHCPv6
packets, all statistic information is an accumulative value. With this command will clear the counter to check the