PLANET WGSW-52040 - Manual (Page 790)

53-330
Command mode:
Port mode.
Usage Guide:
If this command is configured, then it will not receive the flush packets of updating MAC address.
Example:
Disable receiving the flush packets of updating MAC address.
Switch(config)# interface ethernet 1/1
Switch(config-If-Ethernet1/1)# ulpp flush disable mac
53.23 ulpp flush disable mac-vlan
Command:
ulpp flush disable mac-vlan
Function:
Disable receiving the flush packets of mac-vlan type.
Parameter:
None.
Default:
Disable.
Command mode:
Port mode.
Usage Guide:
If enabling this function, forward the hardware of the flush packets with mac-vlan type received in port. It will not be
analyzed.
Example:
Disable receiving the flush packets deleted by mac-vlan of port.
Switch(config)#interface e1/2
Switch(config-if-ethernet1/2)#ulpp flush disable mac-vlan