PLANET WGSW-52040 - Manual (Page 857)

63-397
Example:
Switch#show history
enable
config
interface ethernet 1/3
enable
dir
show ftp
63.13 show history all-users
Command:
show history all-users [detail]
Function:
Show the recent command history of all users.
Parameter:
[detail] shows user name of the executing command. IP address of the user will be shown when logging in the
executing command through Telnet or SSH.
Command Mode:
Admin and configuration mode
Usage Guide:
This command is used to show the recent command history of all users, including time, logging type, executing
command, etc.
Notice: The user can only check the command history of other users whose purview should not be higher than
oneself.
Example:
Switch(config)#show history all-users detail
Time Type User Command
0w 0d 0h 2m Telnet/SSH admin show history all-users detail 192.168.1.2:1419
0w 0d 0h 1m Telnet/SSH admin show history all-users 192.168.1.2:1419
0w 0d 0h 1m Console Null show history all-users