PLANET WGSW-52040 - Manual (Page 273)

17-42
Switch#show gvrp leavetimer running information interface ethernet 1/1
VLANID running state expired time
------------ ---------- ---------
100 UP 0.2 s
300 DOWN non
17.1.21 show gvrp port-member
Command:
show gvrp (active|) port-member
Function:
Shows all ports with GVRP enabled. “active” means the port is in active state with GVRP enabled.
Parameters:
active means the port is in active state
Command Mode:
Admin mode
Default:
GVRP is disabled on port.
Usage Guide:
Show all ports (enable GVRP) saved in GVRP.
Example:
Show all ports with GVRP enabled.
Switch#show gvrp port member
Ports which were enabled gvrp included：
Ethernet1/3（T） Ethernet1/4（T）
Ethernet1/5（T） Ethernet1/6（T）
Ethernet1/7（T） Ethernet1/8（T）
Ethernet1/9（T） Ethernet1/10（T）