PLANET WGSW-52040 - Manual (Page 94)

1-93
Displayed Information Explanation
Group Name Group name
Security level Security level
Read View Read view name
Write View Write view name
Notify View Notify view name
<no writeview specified> No view name specified by the user
1.4.8 show snmp mib
Command:
show snmp mib
Function:
Display all MIB supported by the switch.
Command Mode:
Admin and Configuration Mode.
1.4.9 show snmp status
Command:
show snmp status
Function:
Display SNMP configuration information.
Command mode:
Admin and Configuration Mode.
Example:
Switch#show snmp status
Trap enable
RMON enable
Community Information:
V1/V2c Trap Host Information: