PLANET WGSW-52040 - Manual (Page 254)

15-23
15.5 bpdu-tunnel lacp
Command:
bpdu-tunnel lacp
no bpdu-tunnel lacp
Function:
Configure the specified port to forward lacp packets across the tunnel, the no command cancels the operation.
Parameter:
None.
Command Mode:
Port mode
Default:
Port does not forward any protocol packets across the tunnel.
Usage Guide:
Disable lacp function on the port before configuring this command.
Example:
Configure Ethernet 4/5 to forward lacp packets across the tunnel.
Switch(Config)#in ethernet 4/5
Switch(Config-if-ethernet 4/5)#bpdu-tunnel lacp
15.6 bpdu-tunnel dot1x
Command:
bpdu-tunnel dot1x
no bpdu-tunnel dot1x
Function:
Configure the specified port to forward dot1x packets across the tunnel, the no command cancels the operation.
Parameter:
None.