PLANET WGSW-52040 - Manual (Page 305)

17-74
17.4.4 voice-vlan vlan
Command:
voice-vlan vlan <vlan-id>
no voice-vlan
Function:
Configure the specified VLAN to Voice VLAN; the “no voice-vlan” command cancels the Voice VLAN configuration
of this VLAN.
Parameter:
Vlan id is the number of the specified VLAN.
Command Mode:
Global Mode.
Default:
No Voice VLAN is configured by default.
Usage Guide:
Set specified VLAN for Voice VLAN, There can be only one Voice VLAN at the same time. The voice VLAN cannot
be applied concurrently with MAC-based VLAN.
Example:
Set VLAN100 to Voice VLAN.
Switch#config
Switch(config)#voice-vlan vlan 100