PLANET WGSW-52040 - Manual (Page 751)

51-291
Global Mode.
Default:
Disable SAVI application scene.
Usage Guide:
dhcp-only application scene only detects DHCPv6 packets and DAD NS packets of link-local ipv6 address to be IPv6
address with target field, it does not detect DAD NS packets of non-link-local address. slaac-only application scene
detects DAD NS packets of all types. dhcp-slaac combination application scene detects all DHCPv6 and DAD NS
packets. Disable all kinds of application scene detection function for SAVI by default.
Example:
Enable the specified dhcp-only application scene for SAVI.
Switch(config)#savi ipv6 dhcp-only enable
51.1.11 savi ipv6 mac-binding-limit
Command:
savi ipv6 mac-binding-limit <limit-num>
no savi ipv6 mac-binding-limit
Function:
Configure the dynamic binding number of the same MAC address, no command restores the default value.
Parameter:
limit-num: set the ranging from 1 to 10, the default dynamic binding number is 32 for the same MAC address.
Command Mode:
Global Mode.
Default:
32.
Usage Guide:
This command is used to prevent the exhaust attack of the dynamic binding entry for SAVI.
Example: