PLANET WGSW-52040 - Manual (Page 700)

46-240
Chapter 46 Commands for IPv6
Security RA
46.1 ipv6 security-ra enable
Command:
ipv6 security-ra enable
no ipv6 security-ra enable
Function:
Globally enable IPv6 security RA function, all the RA advertisement messages will not be forwarded through
hardware, but only sent to CPU to handle. The no operation of this command will globally disable IPv6 security RA
function.
Parameters:
None.
Command Mode:
Global Configuration Mode.
Default:
The IPv6 security RA function is disabled by default.
Usage Guide:
Only after enabling the global security RA function, the security RA on a port can be enabled. Globally disabling
security RA will clear all the configured security RA ports. The global security RA function and the global IPv6 SAVI
function are mutually exclusive, so they can not be enabled at the same time.
Example:
Globally enable IPv6 security RA.
Switch(config)#ipv6 security-ra enable