PLANET WGSW-52040 - Manual (Page 696)

45-236
Chapter 45 Commands for SSL
Configuration
45.1 ip http secure-server
Command:
ip http secure-server
no ip http secure-server
Function:
Enable/disable SSL function.
Parameter:
None.
Command Mode:
Global Mode.
Default:
Disabled.
Usage Guide:
This command is used for enable and disable SSL function. After enable SSL function, the users visit the switch
through https client, switch and client use SSL connect, can form safety SSL connect channel. After that, all the data
which transmit of the application layer will be encrypted, then ensure the privacy of the communication.
Example:
Enable SSL function.
Switch(config)#ip http secure-server
45.2 ip http secure-port
Command:
ip http secure-port <port-number>