PLANET WGSW-52040 - Manual (Page 225)

12-224
Chapter 12 Commands for PORT
SECURITY
12.1 clear port-security
Command:
clear port-security {all | configured | dynamic | sticky} [[address <mac-addr> | interface <interface-id>] [vlan
<vlan-id> ]]
Function:
Clear the secure MAC entries for the interfaces.
Parameter:
all：All secure MAC entries on the interfaces
configured：The configured secure MAC
dynamic：The dynamic secure MAC learnt by the interface
sticky：The secure MAC of sticky
mac-addr：The specified secure MAC address
interface-id：The secure MAC entries of the specified interface
vlan-id：The specified VLAN
Default:
None.
Command Mode:
Admin mode
Usage Guide:
None.
Example:
Clear all secure MACs on the interface.
Switch#clear port-security all