PLANET WGSW-52040 - Manual (Page 268)

17-37
Switch(config)#vlan 100
Switch(Config-Vlan100)#private-vlan primary
Note:This will remove all the ports from vlan 100
Switch(Config-Vlan100)#exit
Switch(config)#vlan 200
Switch(Config-Vlan200)#private-vlan isolated
Note:This will remove all the ports from vlan 200
Switch(Config-Vlan200)#exit
Switch(config)#vlan 300
Switch(Config-Vlan300)#private-vlan community
Note:This will remove all the ports from vlan 300
Switch(Config-Vlan300)#exit
17.1.15 private-vlan association
Command:
private-vlan association <secondary-vlan-list>
no private-vlan association
Function:
Set Private VLAN association; the no command cancels Private VLAN association.
Parameter:
<secondary-vlan-list> Sets Secondary VLAN list which is associated to Primary VLAN. There are two types of
Secondary VLAN: Isolated VLAN and Community VLAN. Users can set multiple Secondary VLANs by ';'.
Command mode:
VLAN Mode.
Default:
There is no Private VLAN association by default.
Usage Guide:
This command can only used for Private VLAN. The ports in Secondary VLANs which are associated to Primary
VLAN can communicate to the ports in Primary VLAN.
Before setting Private VLAN association, three types of Private VLANs should have no member ports; the Private
VLAN with Private VLAN association can’t be deleted. When users delete Private VLAN association, all the member