PLANET WGSW-52040 - Manual (Page 548)

33-88
Usage Guide:
This command can check the global binding information of DHCP snooping, each table entry includes the
corresponding MAC address, IP address, port name, VLAN ID and the flag of the binding state. Besides, DHCP
Snooping must be enabled globally, this command can be configured.
Example:
switch#show ip dhcp snooping binding all
ip dhcp snooping static binding count:1169, dynamic binding count:0
MAC IP address Interface Vlan ID Flag
--------------------------------------------------------------------------
00-00-00-00-11-11 192.168.40.1 Ethernet1/1 1 S
00-00-00-00-00-10 192.168.40.10 Ethernet1/2 1 D
00-00-00-00-00-11 192.168.40.11 Ethernet1/4 1 D
00-00-00-00-00-12 192.168.40.12 Ethernet1/4 1 D
00-00-00-00-00-13 192.168.40.13 Ethernet1/4 1 SU
00-00-00-00-00-14 192.168.40.14 Ethernet1/4 1 SU
00-00-00-00-00-15 192.168.40.15 Ethernet1/5 1 SL
00-00-00-00-00-16 192.168.40.16 Ethernet1/5 1 SL
--------------------------------------------------------------------------
The flag explanation of the binding state:
S The static binding is configured by shell command
D The dynamic binding type
U The binding is uploaded to the server
R The static binding is configured by the server
O DHCP response with the option82
L The hardware drive is announced by the binding
X Announcing dot1x module is successful
E Announcing dot1x module is failing
33.31 show trustview status
Command:
show trustview status
Function:
To show all kinds of private packets state information, which sending or receiving from TrustView (inter security