PLANET WGSW-52040 - Manual (Page 209)

11-208
Default:
none.
Usage Guide:
During the specific detection period, serious link event is induced if the number of errored frame seconds is larger
than or equal to the high threshold and the device notifies the peer by sending Information OAMPDU of which the
value of Link Fault flag in Flags field is 1. Note that the high threshold should not be less than the low threshold. The
definition of errored frame seconds is the second in which errored frame is received.
Example:
Configure the high threshold of errored frame seconds event on port 1/4 to be 3000.
Switch(Config-If-Ethernet1/4)#ethernet-oam errored-frame-seconds threshold high 3000
11.14 ethernet-oam errored-frame-seconds threshold low
Command:
ethernet-oam errored-frame-seconds threshold low <low-seconds>
no ethernet-oam errored-frame-seconds threshold low
Function:
Configure the low threshold of errored frame seconds event, no command restores the default value.
Parameters:
<low-seconds>, the low detection threshold of errored frame seconds event, ranging from 1 to 65535 seconds.
Command Mode:
Port mode
Default:
1.
Usage Guide:
During the specific detection period, errored frame seconds event is induced if the number of errored frame seconds
is larger than or equal to the low threshold and the device notifies the peer by sending event notification OAMPDU.
Note that the low threshold should not be larger than the high threshold. The definition of errored frame seconds is
the second in which errored frame is received.