PLANET WGSW-52040 - Manual (Page 376)

20-145
Default:
N/A.
Command mode:
Admin Mode.
Usage Guide:
In single rate single bucket mode, the messages can only red or green when passing police. In the print information,
in-profile means green and out-profile means red. In dual bucket mode, there are three colors of messages. But the
counter can only count two kinds of messages, the red and yellow ones will both be treated as out-profile. Only when
configuring ingress policies, there is statistic information.
Example:
Switch#show mls qos interface ethernet 1/2
Ethernet1/2：
Default COS：0
Trust：COS
Attached Policy Map for Ingress: p1
Classmap classified in-profile out-profile (in packets)
c1 20 10 10
c2 NA NA NA
(If Class Map is not configured Accounting, show NA)
Egress Internal-Priority-TO-Queue map:
INTP 0 1 2 3 4 5 6 7
------------------------------------------------------------------------------
Queue 0 1 2 3 4 5 6 7
Queue Algorithm: WRR
Queue weights:
Queue 0 1 2 3 4 5 6 7
------------------------------------------------------
WrrWeight 1 2 3 4 5 6 7 8
WdrrWeight 10 20 40 80 160 320 640 1280
Bandwidth Guarantee Configuration:
Queue 1 2 3 4 5 6 7 8
------------------------------------------------------------------