PLANET WGSW-52040 - Manual (Page 858)

63-398
0w 0d 0h 1m Console Null end
0w 0d 0h 1m Console Null ip address 192.168.1.1 255.255.255.0
0w 0d 0h 0m Console Null in v 1
0w 0d 0h 0m Console Null telnet-server enable
63.14 show logging buffered
Command:
show logging buffered [level {critical | warnings} | range <begin-index> <end-index>]
Function:
This command displays the detailed information in the log buffer channel. This command is not supported on low
end switches.
Parameter:
level {critical | warnings} means the level of critical information. <begin-index> is the index start value of the log
message, the valid range is 1-65535, <end-index> is the index end value of the log message, and the valid range is
1-65535. When only display logging buffered information of the line card must be added range parameter, but the
main control has not the request.
Command Mode:
Admin and Configuration Mode.
Default:
No parameter specified indicates all the critical log information will be displayed.
Usage Guide:
Warning and critical log information is saved in the buffer zone. When displayed to the terminal, their display format
should be: index ID time <level> module ID [mission name] log information.
Example 1:
Display the critical log information in the log buffer zone channel and related to the main control with index ID
between 940 and 946.
Switch#show logging buffered level critical range 940 946
Example 2:
Display all the information which level is warning and above in the log buffer zone channel.