PLANET WGSW-52040 - Manual (Page 253)

15-22
Port does not forward any protocol packets across the tunnel.
Usage Guide:
Disable gvrp function on the port before configuring this command.
Example:
Configure Ethernet 4/5 to forward gvrp packets across the tunnel.
Switch(Config)#in ethernet 4/5
Switch(Config-if-ethernet 4/5)#bpdu-tunnel gvrp
15.4 bpdu-tunnel uldp
Command:
bpdu-tunnel uldp
no bpdu-tunnel uldp
Function:
Configure the specified port to forward uldp packets across the tunnel, the no command cancels the operation.
Parameter:
None.
Command Mode:
Port mode
Default:
Port does not forward any protocol packets across the tunnel.
Usage Guide:
Disable uldp function on the port before configuring this command.
Example:
Configure Ethernet 4/5 to forward uldp packets across the tunnel.
Switch(Config)#in ethernet 4/5
Switch(Config-if-ethernet 4/5)#bpdu-tunnel uldp