PLANET WGSW-52040 - Manual (Page 55)

1-54
Encrypt system password. The “no service password-encryption” command cancels the encryption.
Command mode:
Global Mode
Default:
No service password-encryption by system default
Usage guide:
The current unencrypted passwords as well as the coming passwords configured by password, enable password, ip
ftp and username command will be encrypted by executed this command. no service password-encryption cancels
this function however encrypted passwords remain unchanged.
Example:
Encrypt system passwords
Switch(config)#service password-encryption
1.1.25 service terminal-length
Command:
service terminal-length <0-512>
no service terminal-length
Function:
Configure the columns of characters displayed in each screen on terminal (vty). The “no service terminal-length”
command cancels the screen shifting operation.
Parameter:
Columns of characters displayed on each screen of vty, ranging between 0-512.
Command mode:
Global Mode
Usage guide:
Configure the columns of characters displayed on each screen of the terminal. The columns of characters displayed
on each screen on the telent.ssh client and the Console will be following this configuration.