PLANET WGSW-52040 - Manual (Page 424)

24-35
24.10 show anti-arpscan
Command:
show anti-arpscan [trust [ip | port | supertrust-port] |prohibited [ip | port]]
Function:
Display the operation information of ARP scanning prevention function.
Parameters:
None.
Default Settings:
Display every port to tell whether it is a trusted port and whether it is closed. If the port is closed, then display how
long it has been closed. Display all the trusted IP and disabled IP.
Command Mode:
Admin Mode
User Guide:
Use “show anti-arpscan trust port” if users only want to check trusted ports. The reset follow the same rule.
Example:
Check the operating state of ARP scanning prevention function after enabling it.
Switch(config)#show anti-arpscan
Total port: 28
Name Port-property beShut shutTime(seconds)
Ethernet1/1 untrust N 0
Ethernet1/2 untrust N 0
Ethernet1/3 untrust N 0
Ethernet1/4 untrust N 0
Ethernet1/5 untrust N 0
Ethernet1/6 untrust N 0
Ethernet1/7 untrust N 0
Ethernet1/8 untrust N 0
Ethernet1/9 untrust N 0
Ethernet1/10 untrust N 0
Ethernet1/11 untrust N 0
Ethernet1/12 untrust N 0
Ethernet4/1 untrust N 0