PLANET WGSW-52040 - Manual (Page 688)

44-228
Switch(config)#radius-server key 0 test
44.15 radius-server retransmit
Command:
radius-server retransmit <retries>
no radius-server retransmit
Function:
Configures the re-transmission times for RADIUS authentication packets; the “no radius-server retransmit”
command restores the default setting.
Parameters:
<retries> is a retransmission times for RADIUS server, the valid range is 0 to 100.
Command mode:
Global Mode
Default:
The default value is 3 times.
Usage Guide:
This command specifies the retransmission time for a packet without a RADIUS server response after the switch
sends the packet to the RADIUS server. If authentication information is missing from the authentication server, AAA
authentication request will need to be re-transmitted to the authentication server. If AAA request retransmission
count reaches the retransmission time threshold without the server responding, the server will be considered to as
not work, the switch sets the server as invalid.
Example:
Setting the RADIUS authentication packet retransmission time to five times.
Switch(config)#radius-server retransmit 5
44.16 radius-server timeout
Command:
radius-server timeout <seconds>