PLANET WGSW-52040 - Manual (Page 786)

53-326
Parameter:
<IFNAME> is the name of the ports.
Default:
None.
Command mode:
Admin mode.
Usage Guide:
Show the statistic information of the flush packets, such as: the information of the flush packets number which has
been received, the time information that receive the flush packets finally.
Example:
Show the statistic information of the flush packets for ULPP group1.
Switch# show ulpp flush counter interface e1/1
Received flush packets: 10
53.18 show ulpp flush-receive-port
Command:
show ulpp flush-receive-port
Function:
Show the port which receive flush packet, flush type and control VLAN.
Parameter:
None.
Default:
None.
Command mode:
Admin mode.
Usage Guide:
None.