PLANET WGSW-52040 - Manual (Page 53)

1-52
option 7, the password is encrypted.
Command mode:
Global mode
Default:
This password is empty by system default
Usage guide:
When both this password and login command are configured, users have to enter the password set by password
command to enter normal user mode on console.
Example:
Switch(config)#password 0 test
Switch(config)#login
1.1.22 privilege
Command:
privilege mode level <1-15> LINE
no privilege mode level <1-15> LINE
Function:
Configure the level for the specified command, the no command restores the original level of the command.
Parameters:
mode: register mode of the command, ‘Tab’ or ‘?’ is able to show all register modes
<1-15> is the level, its range between 1 and 15
LINE: the command needs to be configured, it supports the command abbreviation
Command Mode:
Global mode
Usage Guide:
This function cannot change the command itself. LINE must be the whole command format, the command with the
abbreviation format must be analyzed successfully. For half-baked command, false command about writing and
command that abbreviation cannot be analyzed successfully, the configuration is failure. For changing the command