PLANET WGSW-52040 - Manual (Page 549)

33-89
management background system).
Parameter:
None.
Command Mode:
Admin and Global Configuration Mode.
Default:
None.
Usage Guide:
This command can be used for debugging the communication messages between the switch and the TrustView
server, messages such as protocol version notification, encryption negotiation, free resource and web URL
redirection, and the number of forced log-off messages, as well as the number of forced accounting update
messages, can be displayed.
Example:
Switch#show trustview status
Primary TrustView Server 200.101.0.9:9119
TrustView version2 message inform successed
TrustView inform free resource successed
TrustView inform web redirect address successed
TrustView inform user binding data successed
TrustView version2 message encrypt/digest enabled
Key: 08:02:33:34:35:36:37:38
Rcvd 106 encrypted messages, in which MD5-error 0 messages, DES-error 0 messages
Sent 106 encrypted messages
Free resource is 200.101.0.9/255.255.255.255
Web redirect address for unauthencated users is <http://200.101.0.9:8080>
Rcvd 0 force log-off packets
Rcvd 19 force accounting update packets
Using version two private packet