PLANET WGSW-52040 - Manual (Page 197)

9-196
9.9 show port-group
Command:
show port-group [<port-group-number>] {brief | detail |}
Function:
Display the specified group number or the configuration information of all port-channel which have been configured.
Parameters:
<port-group-number> is the group number of port channel to be displayed, from 1～14; brief displays summary
information; detail displays detailed information.
Command mode:
All Configuration Mode.
Usage Guide:
If the user does not input port-group-number, that means the information of all the existent port-group are showed; if
the port channel corresponds to port-group-number parameter and is not exist, then print a error message, otherwise
display the current port-channel information of the specified group number.
Example:
1. Display summary information for port-group 1.
Switch#show port-group brief
ID: port group number; Mode: port group mode such as on active or passive;
Ports: different types of port number of a port group,
the first is selected ports number, the second is standby ports number, and
the third is unselected ports number.
ID Mode Partner ID Ports Load-balance
-------------------------------------------------------------------------------------
1 active 0x8000,00-12-cf-4d-e1-a1 8,1,1 dst-src-mac
10 passive 0x8000,00-12-cf-4d-e1-b2 8,2,0 dst-src-ip
20 on 8,0,0 src-ip
2. Display the detailed information of port-group 1.
Switch#show port-group 1 detail
Flags: A -- LACP_Activity, B -- LACP_timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired