PLANET WGSW-52040 - Manual (Page 238)

14-7
Chapter 14 Commands for
LLDP-MED
14.1 civic location
Command:
civic location {dhcp server | switch | endpointDev} <country-code>
no civic location
Function:
Configure device type and country code of the location with Civic Address LCI format and enter Civic Address LCI
address mode. The no command cancels all configurations of the location with Civic Address LCI format.
Parameters:
dhcp server: Set device type to be DHCP server
 switch: Set device type to be Switch
 endpointDev: Set device type to be LLDP-MED Endpoint
country-code: Set country code which consist of 2 letters, such as DE or US, it should accord the country code of
ISO 3166 standard.
Default:
No location with Civic Address LCI format is configured on the port.
Command Mode:
Port mode
Usage Guide:
Configure device type and country code of the location with Civic Address LCI format and enter Civic Address LCI
address mode to configure the more detailed location.
Example:
Configure device type as switch and country code as US for the location with Civic Address LCI format on Ethernet
19.
Switch(Config-If-Ethernet1/19)# civic location switch US
Switch(Med-Civic)#