PLANET WGSW-52040 - Manual (Page 707)

47-247
Enable the spoofing-garp-check function, MAB function will not deal with spoofing-garp any more; the no command
disables the function.
Parameters:
None.
Command Mode:
Global Mode
Default:
Disable spoofing-garp-check function.
Usage Guide:
When the terminal of Windows operating system detects the address conflict, it will sends a gratuitous ARP to
correct the error ARP entries generated by gratuitous ARP of the conflict detection. This command is used to detect
the spoofing-garp when occuring the address conflict, MAB function is not deal with the packet any more. Notice:
when enabling the check function, all ARP will be processed the software check, it will add switch’s load.
Example:
Enable spoofing-garp-check function.
Switch(Config)#mac-authentication-bypass spoofing-garp-check enable
47.7 mac-authentication-bypass timeout offline-detect
Command:
mac-authentication-bypass timeout offline-detect (0 | <60-7200>)
no mac-authentication-bypass timeout offline-detect
Function:
Configure offline-detect time. The no command restores the default value.
Parameters:
(0 | <60-7200>): offline-detect time, the range is 0 or 60 to 7200s.
Command Mode:
Global Mode