PLANET WGSW-52040 - Manual (Page 85)

1-84
1.2.28 who
Command:
Who
Function:
Show the current login users with vty.
Parameter:
None.
Command Mode:
All configuration modes
Example:
Show the current login users with vty.
Switch#who
Telnet user a login from 192.168.1.20
1.3 Commands for Configuring Switch IP
1.3.1 interface vlan
Command:
interface vlan <vlan-id>
no interface vlan <vlan-id>
Function:
Enter the VLAN interface configuration mode; the no operation of this command will delete the existing VLAN
interface.
Parameters:
<vlan-id> is the VLAN ID of an existing VLAN, ranging from 1 to 4094.
Command Mode:
Global Configuration Mode.