PLANET WGSW-52040 - Manual (Page 444)

28-55
Parameter:
None.
Default:
Enable.
Command Mode:
Port mode.
Usage Guide:
After the port disables DHCP services, directly drop all DHCP packets sent by the port.
Example:
The port disables DHCP services.
switch(config-if-ethernet1/3)#ip dhcp disable
28.1.16 ip dhcp excluded-address
Command:
ip dhcp excluded-address <low-address> [<high-address>]
no ip dhcp excluded-address <low-address> [<high-address>]
Function:
Specifies addresses excluding from dynamic assignment; the “no ip dhcp excluded-address <low-address>
[<high-address>]” command cancels the setting.
Parameters:
<low-address> is the starting IP address, [<high-address>] is the ending IP address.
Default:
Only individual address is excluded by default.
Command mode:
Global Mode
Usage Guide:
This command can be used to exclude one or several consecutive addresses in the pool from being assigned