PLANET WGSW-52040 - Manual (Page 321)

18-90
Usage Guide:
After the global switch is disabled, this command is also able to be configured sequentially.
Example:
Configure the interval as 30s for sending the MAC address notification.
Switch(Config)#mac-address-table notification interval 30
18.3.5 mac-notification
Command:
mac-notification {added | both | removed}
no mac-notification
Function:
Configure the MAC address notification for the specified port, the no command cancels the function.
Parameter:
added: the added MAC address
removed: the removed MAC address
both: the added and the removed MAC addresses
Default:
No MAC address notification.
Command Mode:
Port mode
Usage Guide:
After the global switch is disabled, this command is also able to be configured sequentially.
Example:
Send the trap notification after the MAC address is added to Ethernet 1/5.
Switch(Config)#in ethernet 1/5
Switch(Config-if-ethernet 1/5)#mac-notification added