PLANET WGSW-52040 - Manual (Page 443)

28-54
Related command: hardware-address, client-identifier
28.1.14 ip dhcp conflict logging
Command:
ip dhcp conflict logging
no ip dhcp conflict logging
Function:
Enables logging for address conflicts detected by the DHCP server; the “no ip dhcp conflict logging” command
disables the logging.
Default:
Logging for address conflict is enabled by default.
Command mode:
Global Mode
Usage Guide:
When logging is enabled, once the address conflict is detected by the DHCP server, the conflicting address will be
logged. Addresses present in the log for conflicts will not be assigned dynamically by the DHCP server until the
conflicting records are deleted.
Example:
Disable logging for DHCP server.
Switch(config)#no ip dhcp conflict logging
Related Command: clear ip dhcp conflict
28.1.15 ip dhcp disable
Command:
ip dhcp disbale
no ip dhcp disable
Function:
The port disables DHCP services, the no command enables DHCP services.