PLANET WGSW-52040 - Manual (Page 677)

44-217
Chapter 44 Commands for RADIUS
44.1 aaa enable
Command:
aaa enable
no aaa enable
Function:
Enables the AAA authentication function in the switch; the "no AAA enable" command disables the AAA
authentication function.
Command mode:
Global Mode.
Parameters:
No.
Default:
AAA authentication is not enabled by default.
Usage Guide:
The AAA authentication for the switch must be enabled first to enable IEEE 802.1x authentication for the switch.
Example:
Enabling AAA function for the switch.
Switch(config)#aaa enable
44.2 aaa-accounting enable
Command:
aaa-accounting enable
no aaa-accounting enable
Function:
Enables the AAA accounting function in the switch: the "no aaa-accounting enable" command disables the AAA