Document Outline

• Chapter 1 Commands for Basic Switch Configuration
  • 1.1 Commands for Basic Configuration
    • 1.1.1 Authentication line
    • 1.1.2 banner
    • 1.1.3 boot img
    • 1.1.4 boot startup-config
    • 1.1.5 clock set
    • 1.1.6 config
    • 1.1.7 debug ssh-server
    • 1.1.8 disable
    • 1.1.9 enable
    • 1.1.10 enable password
    • 1.1.11 end
    • 1.1.12 exec-timeout
    • 1.1.13 exit
    • 1.1.14 help
    • 1.1.15 hostname
    • 1.1.16 ip host
    • 1.1.17 ipv6 host
    • 1.1.18 ip http server
    • 1.1.19 language
    • 1.1.20 login
    • 1.1.21 password
    • 1.1.22 privilege
    • 1.1.23 reload
    • 1.1.24 service password-encryption
    • 1.1.25 service terminal-length
    • 1.1.26 sysContact
    • 1.1.27 sysLocation
    • 1.1.28 set default
    • 1.1.29 setup
    • 1.1.30 show clock
    • 1.1.31 show cpu usage
    • 1.1.32 show cpu utilization
    • 1.1.33 show memory usage
    • 1.1.34 show privilege
    • 1.1.35 show privilege mode LINE
    • 1.1.36 show tech-support
    • 1.1.37 show version
    • 1.1.38 username
    • 1.1.39 web language
    • 1.1.40 write
    • 1.1.41 write running-config
  • 1.2 Commands for Telnet
    • 1.2.1 aaa authorization config-commands
    • 1.2.2 accounting exec
    • 1.2.3 accounting command
    • 1.2.4 authentication enable
    • 1.2.5 authentication ip access-class
    • 1.2.6 authentication ipv6 access-class
    • 1.2.7 authentication line login
    • 1.2.8 authentication securityip
    • 1.2.9 authentication securityipv6
    • 1.2.10 authorization
    • 1.2.11 authorization line vty command
    • 1.2.12 clear line vty <0-31>
    • 1.2.13 crypto key clear rsa
    • 1.2.14 terminal length
    • 1.2.15 terminal monitor
    • 1.2.16 telnet
    • 1.2.17 telnet server enable
    • 1.2.18 telnet-server max-connection
    • 1.2.19 ssh-server authentication-retries
    • 1.2.20 ssh-server enable
    • 1.2.21 ssh-server host-key create rsa
    • 1.2.22 ssh-server max-connection
    • 1.2.23 ssh-server timeout
    • 1.2.24 show crypto key
    • 1.2.25 show ssh-server
    • 1.2.26 show telnet login
    • 1.2.27 show users
    • 1.2.28 who
  • 1.3 Commands for Configuring Switch IP
    • 1.3.1 interface vlan
    • 1.3.2 ip address
    • 1.3.3 ipv6 address
    • 1.3.4 ip bootp-client enable
    • 1.3.5 ip dhcp-client enable
  • 1.4 Commands for SNMP
    • 1.4.1 debug snmp mib
    • 1.4.2 debug snmp kernel
    • 1.4.3 rmon enable
    • 1.4.4 show private-mib oid
    • 1.4.5 show snmp
    • 1.4.6 show snmp engineid
    • 1.4.7 show snmp group
    • 1.4.8 show snmp mib
    • 1.4.9 show snmp status
    • 1.4.10 show snmp user
    • 1.4.11 show snmp view
    • 1.4.12 snmp-server community
    • 1.4.13 snmp-server enable
    • 1.4.14 snmp-server enable traps
    • 1.4.15 snmp-server engineid
    • 1.4.16 snmp-server group
    • 1.4.17 snmp-server host
    • 1.4.18 snmp-server securityip
    • 1.4.19 snmp-server securityip
    • 1.4.20 snmp-server trap-source
    • 1.4.21 snmp-server user
    • 1.4.22 snmp-server view
  • 1.5 Commands for Switch Upgrade
    • 1.5.1 copy（FTP）
    • 1.5.2 copy（TFTP）
    • 1.5.3 ftp-dir
    • 1.5.4 ftp-server enable
    • 1.5.5 ftp-server timeout
    • 1.5.6 ip ftp
    • 1.5.7 show ftp
    • 1.5.8 show tftp
    • 1.5.9 tftp-server enable
    • 1.5.10 tftp-server retransmission-number
    • 1.5.11 tftp-server transmission-timeout
• Chapter 2 File System Commands
  • 2.1 cd
  • 2.2 copy
  • 2.3 delete
  • 2.4 dir
  • 2.5 format
  • 2.6 mkdir
  • 2.7 pwd
  • 2.8 rename
  • 2.9 rmdir
• Chapter 3 Commands for Cluster
  • 3.1 clear cluster nodes
  • 3.2 cluster auto-add
  • 3.3 cluster commander
  • 3.4 cluster ip-pool
  • 3.5 cluster keepalive interval
  • 3.6 cluster keepalive loss-count
  • 3.7 cluster member
  • 3.8 cluster member auto-to-user
  • 3.9 cluster reset member
  • 3.10 cluster run
  • 3.11 cluster update member
  • 3.12 debug cluster
  • 3.13 debug cluster packets
  • 3.14 show cluster
  • 3.15 show cluster members
  • 3.16 show cluster candidates
  • 3.17 show cluster topology
  • 3.18 rcommand commander
  • 3.19 rcommand member
• Chapter 4 Commands for Network Port Configuration
  • 4.1 Commands for Ethernet Port Configuration
    • 4.1.1 bandwidth
    • 4.1.2 clear counters interface
    • 4.1.3 description
    • 4.1.4 flow control
    • 4.1.5 interface ethernet
    • 4.1.6 loopback
    • 4.1.7 mdi
    • 4.1.8 media-type
    • 4.1.9 negotiation
    • 4.1.10 port-rate-statistics interval
    • 4.1.11 port-scan-mode
    • 4.1.12 rate-violation
    • 4.1.13 show interface
    • 4.1.14 shutdown
    • 4.1.15 speed-duplex
    • 4.1.16 storm-control
    • 4.1.17 virtual-cable-test
    • 4.1.18 switchport discard packet
• Chapter 5 Commands for Port Isolation Function
  • 5.1 isolate-port group
  • 5.2 isolate-port group switchport interface
  • 5.3 show isolate-port group
• Chapter 6 Commands for Port Loopback Detection Function
  • 6.1 debug loopback-detection
  • 6.2 loopback-detection control
  • 6.3 loopback-detection control-recovery timeout
  • 6.4 loopback-detection interval-time
  • 6.5 loopback-detection specified-vlan
  • 6.6 show loopback-detection
• Chapter 7 Commands for ULDP
  • 7.1 debug uldp
  • 7.2 debug uldp error
  • 7.3 debug uldp event
  • 7.4 debug uldp fsm interface ethernet
  • 7.5 debug uldp interface ethernet
  • 7.6 debug uldp packet
  • 7.7 uldp aggressive-mode
  • 7.8 uldp enable
  • 7.9 uldp disable
  • 7.10 uldp hello-interval
  • 7.11 uldp manual-shutdown
  • 7.12 uldp recovery-time
  • 7.13 uldp reset
  • 7.14 show uldp
• Chapter 8 Commands for LLDP Function
  • 8.1 clear lldp remote-table
  • 8.2 debug lldp
  • 8.3 debug lldp packets
  • 8.4 lldp enable
  • 8.5 lldp enable (Port)
  • 8.6 lldp mode
  • 8.7 lldp msgTxHold
  • 8.8 lldp neighbors max-num
  • 8.9 lldp notification interval
  • 8.10 lldp tooManyNeighbors
  • 8.11 lldp transmit delay
  • 8.12 lldp transmit optional tlv
  • 8.13 lldp trap
  • 8.14 lldp tx-interval
  • 8.15 show debugging lldp
  • 8.16 show lldp
  • 8.17 show lldp interface ethernet
  • 8.18 show lldp neighbors interface ethernet
  • 8.19 show lldp traffic
• Chapter 9 Commands for Port Channel
  • 9.1 debug port-channel
  • 9.2 interface port-channel
  • 9.3 lacp port-priority
  • 9.4 lacp system-priority
  • 9.5 lacp timeout
  • 9.6 load-balance
  • 9.7 port-group
  • 9.8 port-group mode
  • 9.9 show port-group
• Chapter 10 Commands for MTU
  • 10.1 mtu
• Chapter 11 Commands for EFM OAM
  • 11.1 clear ethernet-oam
  • 11.2 debug ethernet-oam error
  • 11.3 debug ethernet-oam fsm
  • 11.4 debug ethernet-oam packet
  • 11.5 debug ethernet-oam timer
  • 11.6 ethernet-oam
  • 11.7 ethernet-oam errored-frame threshold high
  • 11.8 ethernet-oam errored-frame threshold low
  • 11.9 ethernet-oam errored-frame window
  • 11.10 ethernet-oam errored-frame-period threshold high
  • 11.11 ethernet-oam errored-frame-period threshold low
  • 11.12 ethernet-oam errored-frame-period window
  • 11.13 ethernet-oam errored-frame-seconds threshold high
  • 11.14 ethernet-oam errored-frame-seconds threshold low
  • 11.15 ethernet-oam errored-frame-seconds window
  • 11.16 ethernet-oam errored-symbol-period threshold high
  • 11.17 ethernet-oam errored-symbol-period threshold low
  • 11.18 ethernet-oam errored-symbol-period window
  • 11.19 ethernet-oam link-monitor
  • 11.20 ethernet-oam mode
  • 11.21 ethernet-oam period
  • 11.22 ethernet-oam remote-failure
  • 11.23 ethernet-oam timeout
  • 11.24 show ethernet-oam
  • 11.25 show ethernet-oam events
  • 11.26 show ethernet-oam link-events configuration
• Chapter 12 Commands for PORT SECURITY
  • 12.1 clear port-security
  • 12.2 show port-security
  • 12.3 switchport port-security
  • 12.4 switchport port-security aging
  • 12.5 switchport port-security mac-address
  • 12.6 switchport port-security mac-address sticky
  • 12.7 switchport port-security maximum
  • 12.8 switchport port-security violation
• Chapter 13 Commands for DDM
  • 13.1 clear transceiver threshold-violation
  • 13.2 debug transceiver
  • 13.3 show transceiver
  • 13.4 show transceiver threshold-violation
  • 13.5 transceiver-monitoring
  • 13.6 transceiver-monitoring interval
  • 13.7 transceiver threshold
• Chapter 14 Commands for LLDP-MED
  • 14.1 civic location
  • 14.2 {description-language | province-state | city | county | street | locationNum | location | floor | room | postal | otherInfo}
  • 14.3 ecs location
  • 14.4 lldp med fast count
  • 14.5 lldp med trap
  • 14.6 lldp transmit med tlv all
  • 14.7 lldp transmit med tlv capability
  • 14.8 lldp transmit med tlv extendPoe
  • 14.9 lldp transmit med tlv inventory
  • 14.10 lldp transmit med tlv networkPolicy
  • 14.11 network policy
  • 14.12 show lldp
  • 14.13 show lldp [interface ethernet <IFNAME>]
  • 14.14 show lldp neighbors
• Chapter 15 Commands for bpdu-tunnel
  • 15.1 bpdu-tunnel dmac
  • 15.2 bpdu-tunnel stp
  • 15.3 bpdu-tunnel gvrp
  • 15.4 bpdu-tunnel uldp
  • 15.5 bpdu-tunnel lacp
  • 15.6 bpdu-tunnel dot1x
• Chapter 16 Commands for EEE Energy-saving
  • 16.1 eee enable
• Chapter 17 VLAN Configuration
  • 17.1 Commands for VLAN Configuration
    • 17.1.1 debug gvrp event
    • 17.1.2 debug gvrp packet
    • 17.1.3 dot1q-tunnel enable
    • 17.1.4 dot1q-tunnel selective enable
    • 17.1.5 dot1q-tunnel selective s-vlan
    • 17.1.6 dot1q-tunnel tpid
    • 17.1.7 garp timer join
    • 17.1.8 garp timer leave
    • 17.1.9 garp timer leaveAll
    • 17.1.10 gvrp (Global)
    • 17.1.11 gvrp (Port)
    • 17.1.12 no garp timer
    • 17.1.13 name
    • 17.1.14 private-vlan
    • 17.1.15 private-vlan association
    • 17.1.16 show dot1q-tunnel
    • 17.1.17 show garp timer
    • 17.1.18 show gvrp fsm information
    • 17.1.19 show gvrp leaveAll fsm information
    • 17.1.20 show gvrp leavetimer running information
    • 17.1.21 show gvrp port-member
    • 17.1.22 show gvrp port registerd vlan
    • 17.1.23 show gvrp timer running information
    • 17.1.24 show gvrp vlan registerd port
    • 17.1.25 show vlan
    • 17.1.26 show vlan-translation
    • 17.1.27 switchport access vlan
    • 17.1.28 switchport forbidden vlan
    • 17.1.29 switchport hybrid allowed vlan
    • 17.1.30 switchport hybrid native vlan
    • 17.1.31 switchport interface
    • 17.1.32 switchport mode
    • 17.1.33 switchport mode trunk allow-null
    • 17.1.34 switchport trunk allowed vlan
    • 17.1.35 switchport trunk native vlan
    • 17.1.36 vlan
    • 17.1.37 vlan internal
    • 17.1.38 vlan ingress enable
    • 17.1.39 vlan-translation
    • 17.1.40 vlan-translation enable
  • 17.2 Commands for Multi-to-One VLAN Translation
    • 17.2.1 vlan-translation n-to-1
    • 17.2.2 show vlan-translation n-to-1
  • 17.3 Commands for Dynamic VLAN Configuration
    • 17.3.1 dynamic-vlan mac-vlan prefer
    • 17.3.2 dynamic-vlan subnet-vlan prefer
    • 17.3.3 mac-vlan
    • 17.3.4 mac-vlan vlan
    • 17.3.5 protocol-vlan
    • 17.3.6 show dynamic-vlan prefer
    • 17.3.7 show mac-vlan
    • 17.3.8 show mac-vlan interface
    • 17.3.9 show protocol-vlan
    • 17.3.10 show subnet-vlan
    • 17.3.11 show subnet-vlan interface
    • 17.3.12 subnet-vlan
    • 17.3.13 switchport mac-vlan enable
    • 17.3.14 switchport subnet-vlan enable
  • 17.4 Commands for Voice VLAN Configuration
    • 17.4.1 show voice-vlan
    • 17.4.2 switchport voice-vlan enable
    • 17.4.3 voice-vlan
    • 17.4.4 voice-vlan vlan
• Chapter 18 Commands for MAC Address Table Configuration
  • 18.1 Commands for MAC Address Table Configuration
    • 18.1.1 clearCollisionMacTable
    • 18.1.2 clear mac-address-table dynamic
    • 18.1.3 mac-address-learning cpu-control
    • 18.1.4 mac-address-table aging-time
    • 18.1.5 mac-address-table static | static-multicast | blackhole
    • 18.1.6 showCollisionMacTable
    • 18.1.7 show mac-address-table
  • 18.2 Commands for Mac Address Binding configuration
    • 18.2.1 clear port-security dynamic
    • 18.2.2 show port-security
    • 18.2.3 show port-security address
    • 18.2.4 show port-security interface
    • 18.2.5 switchport port-security
    • 18.2.6 switchport port-security mac-address
    • 18.2.7 switchport port-security maximum
    • 18.2.8 switchport port-security violation
  • 18.3 Commands for MAC Notification
    • 18.3.1 clear mac-notification statistics
    • 18.3.2 mac-address-table notification
    • 18.3.3 mac-address-table notification history-size
    • 18.3.4 mac-address-table notification interval
    • 18.3.5 mac-notification
    • 18.3.6 show mac-notification summary
    • 18.3.7 snmp-server enable traps mac-notification
• Chapter 19 Commands for MSTP
  • 19.1 Commands for MSTP
    • 19.1.1 abort
    • 19.1.2 exit
    • 19.1.3 instance vlan
    • 19.1.4 name
    • 19.1.5 no
    • 19.1.6 revision-level
    • 19.1.7 show
    • 19.1.8 spanning-tree
    • 19.1.9 spanning-tree cost
    • 19.1.10 spanning-tree digest-snooping
    • 19.1.11 spanning-tree format
    • 19.1.12 spanning-tree forward-time
    • 19.1.13 spanning-tree hello-time
    • 19.1.14 spanning-tree link-type p2p
    • 19.1.15 spanning-tree maxage
    • 19.1.16 spanning-tree max-hop
    • 19.1.17 spanning-tree mcheck
    • 19.1.18 spanning-tree mode
    • 19.1.19 mstp sets the switch in IEEE802.1s MSTP mode; stp sets the switch in IEEE802.1D STP mode; rstp sets the switch in IEEE802.1D RSTP mode.
    • 19.1.20 spanning-tree mst configuration
    • 19.1.21 spanning-tree mst cost
    • 19.1.22 spanning-tree cost-format
    • 19.1.23 spanning-tree mst loopguard
    • 19.1.24 spanning-tree mst port-priority
    • 19.1.25 spanning-tree mst priority
    • 19.1.26 spanning-tree mst rootguard
    • 19.1.27 spanning-tree portfast
    • 19.1.28 spanning-tree port-priority
    • 19.1.29 spanning-tree priority
    • 19.1.30 spanning-tree rootguard
    • 19.1.31 spanning-tree tcflush (Global mode)
    • 19.1.32 spanning-tree tcflush (Port mode)
    • 19.1.33 spanning-tree transmit-hold-count
  • 19.2 Commands for Monitor and Debug
    • 19.2.1 debug spanning-tree
    • 19.2.2 show mst-pending
    • 19.2.3 show spanning-tree
    • 19.2.4 show spanning-tree mst config
• Chapter 20 Commands for QoS
  • 20.1 accounting
  • 20.2 class
  • 20.3 class-map
  • 20.4 clear mls qos statistics
  • 20.5 drop
  • 20.6 match
  • 20.7 mls qos cos
  • 20.8 mls qos map
  • 20.9 mls qos queue algorithm
  • 20.10 mls qos queue wrr weight
  • 20.11 mls qos queue wdrr weight
  • 20.12 mls qos queue bandwidth
  • 20.13 mls qos trust
  • 20.14 policy
  • 20.15 policy aggregate
  • 20.16 policy-map
  • 20.17 service-policy input
  • 20.18 service-policy input vlan
  • 20.19 set
  • 20.20 show class-map
  • 20.21 show policy-map
  • 20.22 show mls qos interface
  • 20.23 show mls qos maps
  • 20.24 show mls qos vlan
  • 20.25 transmit
• Chapter 21 Commands for Flow-based Redirection
  • 21.1 access-group redirect to interface ethernet
  • 21.2 show flow-based-redirect
• Chapter 22 Commands for Flexible QinQ
  • 22.1 match
  • 22.2 service-policy
  • 22.3 set
• Chapter 23 Commands for Layer 3 Management
  • 23.1 Commands for Layer 3 Interface
    • 23.1.1 description
    • 23.1.2 interface vlan
    • 23.1.3 show ip route
  • 23.2 Commands for IPv4/v6 configuration
    • 23.2.1 clear ip traffic
    • 23.2.2 clear ipv6 neighbor
    • 23.2.3 debug ip icmp
    • 23.2.4 debug ip packet
    • 23.2.5 debug ipv6 packet
    • 23.2.6 debug ipv6 icmp
    • 23.2.7 debug ipv6 nd
    • 23.2.8 ip address
    • 23.2.9 ip default-gateway
    • 23.2.10 ip route
    • 23.2.11 ipv6 address
    • 23.2.12 ipv6 default-gateway
    • 23.2.13 ipv6 nd dad attempts
    • 23.2.14 ipv6 nd ns-interval
    • 23.2.15 ipv6 neighbor
    • 23.2.16 show ip interface
    • 23.2.17 show ip traffic
    • 23.2.18 show ipv6 interface
    • 23.2.19 show ipv6 route
    • 23.2.20 show ipv6 neighbors
    • 23.2.21 show ipv6 traffic
  • 23.3 Commands for ARP Configuration
    • 23.3.1 arp
    • 23.3.2 clear arp-cache
    • 23.3.3 clear arp traffic
    • 23.3.4 debug arp
    • 23.3.5 show arp
    • 23.3.6 show arp traffic
• Chapter 24 IPv4 Multicast Protocol
  • 24.1 anti-arpscan enable
  • 24.2 anti-arpscan port-based threshold
  • 24.3 anti-arpscan ip-based threshold
  • 24.4 anti-arpscan trust
  • 24.5 anti-arpscan trust ip
  • 24.6 anti-arpscan recovery enable
  • 24.7 anti-arpscan recovery time
  • 24.8 anti-arpscan log enable
  • 24.9 anti-arpscan trap enable
  • 24.10 show anti-arpscan
  • 24.11 debug anti-arpscan
• Chapter 25 Commands for Preventing ARP Spoofing
  • 25.1 ip arp-security updateprotect
  • 25.2 ip arp-security learnprotect
  • 25.3 ip arp-security convert
  • 25.4 clear ip arp dynamic
  • 25.5 clear ipv6 nd dynamic
• Chapter 26 Command for ARP GUARD
  • 26.1 arp-guard ip
• Chapter 27 Commands for Gratuitous ARP Configuration
  • 27.1 ip gratuitous-arp
  • 27.2 show ip gratuitous-arp
• Chapter 28 Commands for DHCP
  • 28.1 Commands for DHCP Server Configuration
    • 28.1.1 bootfile
    • 28.1.2 clear ip dhcp binding
    • 28.1.3 clear ip dhcp conflict
    • 28.1.4 clear ip dhcp server statistics
    • 28.1.5 client-identifier
    • 28.1.6 debug ip dhcp client
    • 28.1.7 debug ip dhcp relay
    • 28.1.8 debug ip dhcp server
    • 28.1.9 default-router
    • 28.1.10 dns-server
    • 28.1.11 domain-name
    • 28.1.12 hardware-address
    • 28.1.13 host
    • 28.1.14 ip dhcp conflict logging
    • 28.1.15 ip dhcp disable
    • 28.1.16 ip dhcp excluded-address
    • 28.1.17 ip dhcp pool
    • 28.1.18 ip dhcp conflict ping-detection enable
    • 28.1.19 ip dhcp ping packets
    • 28.1.20 ip dhcp ping timeout
    • 28.1.21 lease
    • 28.1.22 max-lease-time
    • 28.1.23 netbios-name-server
    • 28.1.24 netbios-node-type
    • 28.1.25 network-address
    • 28.1.26 next-server
    • 28.1.27 option
    • 28.1.28 service dhcp
    • 28.1.29 show ip dhcp binding
    • 28.1.30 show ip dhcp conflict
    • 28.1.31 show ip dhcp relay information option
    • 28.1.32 show ip dhcp server statistics
  • 28.2 Commands for DHCP Relay Configuration
    • 28.2.1 ip dhcp broadcast suppress
    • 28.2.2 ip dhcp relay share-vlan <vlanid> sub-vlan <vlanlist>
    • 28.2.3 ip forward-protocol udp bootps
    • 28.2.4 ip helper-address
    • 28.2.5 show ip forward-protocol
    • 28.2.6 show ip helper-address
• Chapter 29 Commands for DHCPv6
  • 29.1 clear ipv6 dhcp binding
  • 29.2 clear ipv6 dhcp conflict
  • 29.3 clear ipv6 dhcp statistics
  • 29.4 debug ipv6 dhcp client packet
  • 29.5 debug ipv6 dhcp detail
  • 29.6 debug ipv6 dhcp relay packet
  • 29.7 debug ipv6 dhcp server
  • 29.8 dns-server
  • 29.9 domain-name
  • 29.10 excluded-address
  • 29.11 ipv6 address
  • 29.12 ipv6 dhcp client pd
  • 29.13 ipv6 dhcp client pd hint
  • 29.14 ipv6 dhcp pool
  • 29.15 ipv6 dhcp relay destination
  • 29.16 ipv6 dhcp server
  • 29.17 ipv6 general-prefix
  • 29.18 ipv6 local pool
  • 29.19 lifetime
  • 29.20 network-address
  • 29.21 prefix-delegation
  • 29.22 prefix-delegation pool
  • 29.23 service dhcpv6
  • 29.24 show ipv6 dhcp
  • 29.25 show ipv6 dhcp binding
  • 29.26 show ipv6 dhcp conflict
  • 29.27 show ipv6 dhcp interface
  • 29.28 show ipv6 dhcp pool
  • 29.29 show ipv6 dhcp statistics
  • 29.30 show ipv6 general-prefix
  • 29.31 show ipv6 local pool
• Chapter 30 Commands for DHCP Option 82
  • 30.1 debug ip dhcp relay packet
  • 30.2 ip dhcp relay information option
  • 30.3 ip dhcp relay information option delimiter
  • 30.4 ip dhcp relay information option remote-id
  • 30.5 ip dhcp relay information option remote-id format
  • 30.6 ip dhcp relay information option self-defined remote-id
  • 30.7 ip dhcp relay information option self-defined remote-id format
  • 30.8 ip dhcp relay information option self-defined subscriber-id
  • 30.9 ip dhcp relay information option self-defined subscriber-id format
  • 30.10 ip dhcp relay information option subscriber-id
  • 30.11 ip dhcp relay information option subscriber-id format
  • 30.12 ip dhcp relay information policy
  • 30.13 ip dhcp server relay information enable
  • 30.14 show ip dhcp relay information option
• Chapter 31 IPv4 Multicast Protocol
  • 31.1 option 43 ascii LINE
  • 31.2 option 43 hex WORD
  • 31.3 option 43 ip A.B.C.D
  • 31.4 option 60 ascii LINE
  • 31.5 option 60 hex WORD
  • 31.6 option 60 ip A.B.C.D
• Chapter 32 Commands for DHCPv6 option37, 38
  • 32.1 Commands for DHCPv6 option37, 38
    • 32.1.1 address range
    • 32.1.2 class
    • 32.1.3 ipv6 dhcp class
    • 32.1.4 ipv6 dhcp relay remote-id
    • 32.1.5 ipv6 dhcp relay remote-id option
    • 32.1.6 ipv6 dhcp relay subscriber-id
    • 32.1.7 ipv6 dhcp relay subscriber-id option
    • 32.1.8 ipv6 dhcp relay subscriber-id select delimiter
    • 32.1.9 ipv6 dhcp server remote-id option
    • 32.1.10 ipv6 dhcp server select relay-forw
    • 32.1.11 ipv6 dhcp server subscriber-id option
    • 32.1.12 ipv6 dhcp snooping remote-id
    • 32.1.13 ipv6 dhcp snooping remote-id option
    • 32.1.14 ipv6 dhcp snooping remote-id policy
    • 32.1.15 ipv6 dhcp snooping subscriber-id
    • 32.1.16 ipv6 dhcp snooping subscriber-id option
    • 32.1.17 ipv6 dhcp snooping subscriber-id policy
    • 32.1.18 ipv6 dhcp snooping subscriber-id select delimiter
    • 32.1.19 ipv6 dhcp use class
    • 32.1.20 remote-id subscriber-id
  • 32.2 Commands for Monitoring and Debugging
    • 32.2.1 debug ipv6 dhcp detail
    • 32.2.2 debug ipv6 dhcp relay packet
    • 32.2.3 debug ipv6 dhcp snooping packet
    • 32.2.4 show ipv6 dhcp relay option
    • 32.2.5 show ipv6 dhcp snooping option
• Chapter 33 Commands for DHCP Snooping
  • 33.1 debug ip dhcp snooping binding
  • 33.2 debug ip dhcp snooping event
  • 33.3 debug ip dhcp snooping packet
  • 33.4 debug ip dhcp snooping packet interface
  • 33.5 debug ip dhcp snooping update
  • 33.6 enable trustview key
  • 33.7 ip dhcp snooping
  • 33.8 ip dhcp snooping action
  • 33.9 ip dhcp snooping action MaxNum
  • 33.10 ip dhcp snooping binding
  • 33.11 ip dhcp snooping binding dot1x
  • 33.12 ip dhcp snooping binding user
  • 33.13 ip dhcp snooping binding user-control
  • 33.14 ip dhcp snooping binding user-control max-user
  • 33.15 ip dhcp snooping information enable
  • 33.16 ip dhcp snooping information option allow-untrusted (replace|)
  • 33.17 ip dhcp snooping information option delimiter
  • 33.18 ip dhcp snooping information option remote-id
  • 33.19 ip dhcp snooping information option self-defined remote-id
  • 33.20 ip dhcp snooping information option self-defined remote-id format
  • 33.21 ip dhcp snooping information option self-defined subscriber-id
  • 33.22 ip dhcp snooping information option self-defined subscriber-id format
  • 33.23 ip dhcp snooping information option subscriber-id
  • 33.24 ip dhcp snooping information option subscriber-id format
  • 33.25 ip dhcp snooping limit-rate
  • 33.26 ip dhcp snooping trust
  • 33.27 ip user helper-address
  • 33.28 ip user private packet version two
  • 33.29 show ip dhcp snooping
  • 33.30 show ip dhcp snooping binding all
  • 33.31 show trustview status
• Chapter 34 Commands for DHCP Snooping option 82
  • 34.1 ip dhcp snooping information enable
• Chapter 35 IPv4 Multicast Protocol
  • 35.1 Commands for DCSCM
    • 35.1.1 access-list (Multicast Destination Control)
    • 35.1.2 access-list (Multicast Source Control)
    • 35.1.3 ip multicast destination-control access-group
    • 35.1.4 ip multicast destination-control access-group (sip)
    • 35.1.5 ip multicast destination-control access-group (vmac)
    • 35.1.6 ip multicast policy
    • 35.1.7 ip multicast source-control
    • 35.1.8 ip multicast source-control access-group
    • 35.1.9 multicast destination-control
    • 35.1.10 show ip multicast destination-control
    • 35.1.11 show ip multicast destination-control access-list
    • 35.1.12 show ip multicast policy
    • 35.1.13 show ip multicast source-control
    • 35.1.14 show ip multicast source-control access-list
  • 35.2 Commands for IGMP Snooping
    • 35.2.1 clear ip igmp snooping vlan
    • 35.2.2 clear ip igmp snooping vlan <1-4094> mrouter-port
    • 35.2.3 debug igmp snooping all/packet/event/timer/mfc
    • 35.2.4 ip igmp snooping
    • 35.2.5 ip igmp snooping proxy
    • 35.2.6 ip igmp snooping vlan
    • 35.2.7 ip igmp snooping vlan immediate-leave
    • 35.2.8 ip igmp snooping vlan l2-general-querier
    • 35.2.9 ip igmp snooping vlan l2-general-querier-source
    • 35.2.10 ip igmp snooping vlan l2-general-querier-version
    • 35.2.11 ip igmp snooping vlan limit
    • 35.2.12 ip igmp snooping vlan interface (ethernet | port-channel|) IFNAME limit
    • 35.2.13 ip igmp snooping vlan mrouter-port interface
    • 35.2.14 ip igmp snooping vlan mrouter-port learnpim
    • 35.2.15 ip igmp snooping vlan mrpt
    • 35.2.16 ip igmp snooping vlan query-interval
    • 35.2.17 ip igmp snooping vlan query-mrsp
    • 35.2.18 ip igmp snooping vlan query-robustness
    • 35.2.19 ip igmp snooping vlan report source-address
    • 35.2.20 ip igmp snooping vlan specific-query-mrsp
    • 35.2.21 ip igmp snooping vlan static-group
    • 35.2.22 ip igmp snooping vlan suppression-query-time
    • 35.2.23 show ip igmp snooping
• Chapter 36 IPv6 Multicast Protocol
  • 36.1 Commands for MLD Snooping Configuration
    • 36.1.1 clear ipv6 mld snooping vlan
    • 36.1.2 clear ipv6 mld snooping vlan <1-4094> mrouter-port
    • 36.1.3 debug mld snooping all/packet/event/timer/mfc
    • 36.1.4 ipv6 mld snooping
    • 36.1.5 ipv6 mld snooping vlan
    • 36.1.6 ipv6 mld snooping vlan immediate-leave
    • 36.1.7 ipv6 mld snooping vlan l2-general-querier
    • 36.1.8 ipv6 mld snooping vlan limit
    • 36.1.9 ipv6 mld snooping vlan mrouter-port interface
    • 36.1.10 ipv6 mld snooping vlan mrouter-port learnpim6
    • 36.1.11 ipv6 mld snooping vlan mrpt
    • 36.1.12 ipv6 mld snooping vlan query-interval
    • 36.1.13 ipv6 mld snooping vlan query-mrsp
    • 36.1.14 ipv6 mld snooping vlan query-robustness
    • 36.1.15 ipv6 mld snooping vlan static-group
    • 36.1.16 ipv6 mld snooping vlan suppression-query-time
    • 36.1.17 show ipv6 mld snooping
• Chapter 37 Commands for Multicast VLAN
  • 37.1 multicast-vlan
  • 37.2 multicast-vlan association
  • 37.3 multicast-vlan association interface
• Chapter 38 Commands for ACL
  • 38.1 absolute-periodic/periodic
  • 38.2 absolute start
  • 38.3 access-list (ip extended)
  • 38.4 access-list (ip standard)
  • 38.5 access-list(mac extended)
  • 38.6 access-list(mac-ip extended)
  • 38.7 access-list(mac standard)
  • 38.8 clear access-group statistic
  • 38.9 firewall
  • 38.10 ip access extended
  • 38.11 ip access standard
  • 38.12 ipv6 access-list
  • 38.13 ipv6 access standard
  • 38.14 ipv6 access extended
  • 38.15 {ip|ipv6|mac|mac-ip} access-group
  • 38.16 mac access extended
  • 38.17 mac-ip access extended
  • 38.18 permit | deny (ip extended)
  • 38.19 permit | deny(ip standard)
  • 38.20 permit | deny(ipv6 extended)
  • 38.21 permit | deny(ipv6 standard)
  • 38.22 permit | deny(mac extended)
  • 38.23 permit | deny(mac-ip extended)
  • 38.24 show access-lists
  • 38.25 show access-group
  • 38.26 show firewall
  • 38.27 show ipv6 access-lists
  • 38.28 show time-range
  • 38.29 time-range
• Chapter 39 Commands for 802.1x
  • 39.1 debug dot1x detail
  • 39.2 debug dot1x error
  • 39.3 debug dot1x fsm
  • 39.4 debug dot1x packet
  • 39.5 dot1x accept-mac
  • 39.6 dot1x eapor enable
  • 39.7 dot1x enable
  • 39.8 dot1x ipv6 passthrough
  • 39.9 dot1x guest-vlan
  • 39.10 dot1x macfilter enable
  • 39.11 dot1x macbased port-down-flush
  • 39.12 dot1x max-req
  • 39.13 dot1x user allow-movement
  • 39.14 dot1x user free-resource
  • 39.15 dot1x max-user macbased
  • 39.16 dot1x max-user userbased
  • 39.17 dot1x portbased mode single-mode
  • 39.18 dot1x port-control
  • 39.19 dot1x port-method
  • 39.20 dot1x privateclient enable
  • 39.21 dot1x privateclient protect enable
  • 39.22 dot1x re-authenticate
  • 39.23 dot1x re-authentication
  • 39.24 dot1x timeout quiet-period
  • 39.25 dot1x timeout re-authperiod
  • 39.26 dot1x timeout tx-period
  • 39.27 dot1x unicast enable
  • 39.28 show dot1x
• Chapter 40 Commands for the Number Limitation Function of MAC and IP in Port, VLAN
  • 40.1 debug ip arp count
  • 40.2 debug ipv6 nd count
  • 40.3 debug switchport arp count
  • 40.4 debug switchport mac count
  • 40.5 debug switchport nd count
  • 40.6 debug vlan mac count
  • 40.7 ip arp dynamic maximum
  • 40.8 ipv6 nd dynamic maximum
  • 40.9 mac-address query timeout
  • 40.10 show arp-dynamic count
  • 40.11 show mac-address dynamic count
  • 40.12 show nd-dynamic count
  • 40.13 switchport arp dynamic maximum
  • 40.14 switchport mac-address dynamic maximum
  • 40.15 switchport mac-address violation
  • 40.16 switchport nd dynamic maximum
  • 40.17 vlan mac-address dynamic maximum
• Chapter 41 Commands for AM Configuration
  • 41.1 am enable
  • 41.2 am port
  • 41.3 am ip-pool
  • 41.4 am mac-ip-pool
  • 41.5 no am all
  • 41.6 show am
• Chapter 42 Commands for Security Feature
  • 42.1 dosattack-check srcip-equal-dstip enable
  • 42.2 dosattack-check tcp-flags enable
  • 42.3 dosattack-check srcport-equal-dstport enable
  • 42.4 dosattack-check icmp-attacking enable
  • 42.5 dosattack-check icmpV4-size
• Chapter 43 Commands for TACACS+
  • 43.1 tacacs-server authentication host
  • 43.2 tacacs-server key
  • 43.3 tacacs-server nas-ipv4
  • 43.4 tacacs-server timeout
  • 43.5 debug tacacs-server
• Chapter 44 Commands for RADIUS
  • 44.1 aaa enable
  • 44.2 aaa-accounting enable
  • 44.3 aaa-accounting update
  • 44.4 debug aaa packet
  • 44.5 debug aaa detail attribute
  • 44.6 debug aaa detail connection
  • 44.7 debug aaa detail event
  • 44.8 debug aaa error
  • 44.9 radius nas-ipv4
  • 44.10 radius nas-ipv6
  • 44.11 radius-server accounting host
  • 44.12 radius-server authentication host
  • 44.13 radius-server dead-time
  • 44.14 radius-server key
  • 44.15 radius-server retransmit
  • 44.16 radius-server timeout
  • 44.17 radius-server accounting-interim-update timeout
  • 44.18 show aaa authenticated-user
  • 44.19 show aaa authenticating-user
  • 44.20 show aaa config
  • 44.21 show radius authenticated-user count
  • 44.22 show radius authenticating-user count
  • 44.23 show radius count
• Chapter 45 Commands for SSL Configuration
  • 45.1 ip http secure-server
  • 45.2 ip http secure-port
  • 45.3 ip http secure- ciphersuite
  • 45.4 show ip http secure-server status
  • 45.5 debug ssl
• Chapter 46 Commands for IPv6 Security RA
  • 46.1 ipv6 security-ra enable
  • 46.2 ipv6 security-ra enable
  • 46.3 show ipv6 security-ra
  • 46.4 debug ipv6 security-ra
• Chapter 47 Commands for MAB
  • 47.1 authentication mab
  • 47.2 clear mac-authentication-bypass binding
  • 47.3 debug mac-authentication-bypass
  • 47.4 mac-authentication-bypass binding-limit
  • 47.5 mac-authentication-bypass enable
  • 47.6 mac-authentication-bypass spoofing-garp-check
  • 47.7 mac-authentication-bypass timeout offline-detect
  • 47.8 mac-authentication-bypass timeout quiet-period
  • 47.9 mac-authentication-bypass timeout stale-period
  • 47.10 mac-authentication-bypass username-format
  • 47.11 show mac-authentication-bypass
• Chapter 48 Commands for PPPoE Intermediate Agent
  • 48.1 debug pppoe intermediate agent packet {receive | send} interface ethernet <interface-name>
  • 48.2 pppoe intermediate-agent
  • 48.3 pppoe intermediate-agent (Port)
  • 48.4 pppoe intermediate-agent circuit-id
  • 48.5 pppoe intermediate-agent delimiter
  • 48.6 pppoe intermediate-agent format
  • 48.7 pppoe intermediate-agent remote-id
  • 48.8 pppoe intermediate-agent trust
  • 48.9 pppoe intermediate-agent type self-defined circuit-id
  • 48.10 pppoe intermediate-agent type self-defined remote-id
  • 48.11 pppoe intermediate-agent type tr-101 circuit-id access-node-id
  • 48.12 pppoe intermediate-agent type tr-101 circuit-id identifier-string option delimiter
  • 48.13 pppoe intermediate-agent vendor-tag strip
  • 48.14 show pppoe intermediate-agent access-node-id
  • 48.15 show pppoe intermediate-agent identifier-string option delimiter
  • 48.16 show pppoe intermediate-agent info
• Chapter 49 Commands for Web Portal Configuration
  • 49.1 clear webportal binding
  • 49.2 debug webportal binding
  • 49.3 debug webportal error
  • 49.4 debug webportal event
  • 49.5 debug webportal packet
  • 49.6 ip dhcp snooping binding webportal
  • 49.7 show webportal
  • 49.8 show webportal binding
  • 49.9 webportal binding-limit
  • 49.10 webportal enable
  • 49.11 webportal enable (Port)
  • 49.12 webportal nas-ip
  • 49.13 webportal redirect
• Chapter 50 Commands for VLAN-ACL
  • 50.1 clear vacl statistic vlan
  • 50.2 show vacl vlan
  • 50.3 vacl ip access-group
  • 50.4 vacl ipv6 access-group
  • 50.5 vacl mac access-group
  • 50.6 vacl mac-ip access-group
• Chapter 51 Commands for SAVI
  • 51.1 Commands for SAVI
    • 51.1.1 ipv6 cps prefix
    • 51.1.2 ipv6 cps prefix check enable
    • 51.1.3 ipv6 dhcp snooping trust
    • 51.1.4 ipv6 nd snooping trust
    • 51.1.5 savi check binding
    • 51.1.6 savi enable
    • 51.1.7 savi ipv6 binding num
    • 51.1.8 savi ipv6 check source binding
    • 51.1.9 savi ipv6 check source ip-address mac-address
    • 51.1.10 savi ipv6 {dhcp-only | slaac-only | dhcp-slaac} enable
    • 51.1.11 savi ipv6 mac-binding-limit
    • 51.1.12 savi max-dad-dalay
    • 51.1.13 savi max-dad-prepare-delay
    • 51.1.14 savi max-slaac-life
    • 51.1.15 savi timeout bind-protect
  • 51.2 Commands for Monitor and Debug
    • 51.2.1 debug ipv6 dhcp snooping binding
    • 51.2.2 debug ipv6 dhcp snooping event
    • 51.2.3 debug ipv6 dhcp snooping packet
    • 51.2.4 debug ipv6 nd snooping binding
    • 51.2.5 debug ipv6 nd snooping event
    • 51.2.6 debug ipv6 nd snooping packet
    • 51.2.7 show savi ipv6 check source binding
• Chapter 52 Commands for MRPP
  • 52.1 control-vlan
  • 52.2 clear mrpp statistics
  • 52.3 debug mrpp
  • 52.4 enable
  • 52.5 errp domain
  • 52.6 fail-timer
  • 52.7 hello-timer
  • 52.8 mrpp eaps compatible
  • 52.9 mrpp enable
  • 52.10 mrpp errp compatible
  • 52.11 mrpp poll-time
  • 52.12 mrpp ring
  • 52.13 mrpp ring primary-port
  • 52.14 mrpp ring secondary-port
  • 52.15 node-mode
  • 52.16 show mrpp
  • 52.17 show mrpp statistics
• Chapter 53 Commands for ULPP
  • 53.1 clear ulpp flush counter interface
  • 53.2 control vlan
  • 53.3 debug ulpp error
  • 53.4 debug ulpp event
  • 53.5 debug ulpp flush content interface
  • 53.6 debug ulpp flush {send | receive} interface
  • 53.7 description
  • 53.8 flush disable arp
  • 53.9 flush disable mac
  • 53.10 flush disable mac-vlan
  • 53.11 flush enable arp
  • 53.12 flush enable mac
  • 53.13 flush enable mac-vlan
  • 53.14 preemption delay
  • 53.15 preemption mode
  • 53.16 protect vlan-reference-instance
  • 53.17 show ulpp flush counter interface
  • 53.18 show ulpp flush-receive-port
  • 53.19 show ulpp group
  • 53.20 ulpp control vlan
  • 53.21 ulpp flush disable arp
  • 53.22 ulpp flush disable mac
  • 53.23 ulpp flush disable mac-vlan
  • 53.24 ulpp flush enable arp
  • 53.25 ulpp flush enable mac
  • 53.26 ulpp flush enable mac-vlan
  • 53.27 ulpp group
  • 53.28 ulpp group master
  • 53.29 ulpp group slave
• Chapter 54 IPv4 Multicast Protocol
  • 54.1 debug ulsm event
  • 54.2 show ulsm group
  • 54.3 ulsm group
  • 54.4 ulsm group {uplink | downlink}
• Chapter 55 Commands for Mirroring Configuration
  • 55.1 monitor session source interface
  • 55.2 monitor session source interface access-list
  • 55.3 monitor session destination interface
  • 55.4 show monitor
• Chapter 56 Commands for sFlow
  • 56.1 sflow agent-address
  • 56.2 sflow analyzer
  • 56.3 sflow counter-interval
  • 56.4 sflow data-len
  • 56.5 sflow destination
  • 56.6 sflow header-len
  • 56.7 sflow priority
  • 56.8 sflow rate
  • 56.9 show sflow
• Chapter 57 Commands for RSPAN Configuration
  • 57.1 remote-span
  • 57.2 monitor session remote vlan
  • 57.3 monitor session reflector-port
• Chapter 58 Commands for ERSPAN
  • 58.1 monitor session
  • 58.2 monitor session destination tunnel
• Chapter 59 Commands for SNTP
  • 59.1 clock timezone
  • 59.2 debug sntp
  • 59.3 sntp polltime
  • 59.4 sntp server
  • 59.5 show sntp
• Chapter 60 Commands for NTP
  • 60.1 clock timezone
  • 60.2 debug ntp adjust
  • 60.3 debug ntp authentication
  • 60.4 debug ntp events
  • 60.5 debug ntp packet
  • 60.6 debug ntp sync
  • 60.7 ntp access-group
  • 60.8 ntp authenticate
  • 60.9 ntp authentication-key
  • 60.10 ntp broadcast server count
  • 60.11 ntp disable
  • 60.12 ntp enable
  • 60.13 ntp ipv6 multicast client
  • 60.14 ntp multicast client
  • 60.15 ntp server
  • 60.16 ntp trusted-key
  • 60.17 show ntp status
  • 60.18 show ntp session
• Chapter 61 Commands for Summer Time
  • 61.1 clock summer-time absolute
  • 61.2 clock summer-time recurring
  • 61.3 clock summer-time recurring
• Chapter 62 Commands for DNSv4/v6
  • 62.1 Commands for DCSCM
    • 62.1.1 access-list (Multicast Destination Control)
  • 62.2 clear dynamic-host
  • 62.3 debug dns
  • 62.4 dns-server
  • 62.5 dns lookup
  • 62.6 show dns name-server
  • 62.7 show dns domain-list
  • 62.8 show dns hosts
  • 62.9 show dns config
  • 62.10 show dns client
  • 62.11 ip domain-lookup
  • 62.12 ip domain-list
  • 62.13 ip dns server
  • 62.14 ip dns server queue maximum
  • 62.15 ip dns server queue timeout
• Chapter 63 Commands for Show
  • 63.1 clear history all-users
  • 63.2 clear logging
  • 63.3 history all-users max-length
  • 63.4 logging
  • 63.5 logging executed-commands
  • 63.6 logging loghost sequence-number
  • 63.7 ping
  • 63.8 ping6
  • 63.9 show boot-files
  • 63.10 show debugging
  • 63.11 show flash
  • 63.12 show history
  • 63.13 show history all-users
  • 63.14 show logging buffered
  • 63.15 show logging executed-commands state
  • 63.16 show logging source
  • 63.17 show memory
  • 63.18 show running-config
  • 63.19 show running-config current-mode
  • 63.20 show startup-config
  • 63.21 show switchport interface
  • 63.22 show tcp
  • 63.23 show tcp ipv6
  • 63.24 show telnet login
  • 63.25 show tech-support
  • 63.26 show udp
  • 63.27 show udp ipv6
  • 63.28 show version
  • 63.29 traceroute
  • 63.30 traceroute6
• Chapter 64 Commands for Reload Switch after Specified Time
  • 64.1 reload after
  • 64.2 reload cancel
  • 64.3 show reload
• Chapter 65 Commands for Debugging and Diagnosis for Packets Received and Sent by CPU
  • 65.1 clear cpu-rx-stat protocol
  • 65.2 cpu-rx-ratelimit protocol
  • 65.3 cpu-rx-ratelimit total
  • 65.4 debug driver
  • 65.5 show cpu-rx protocol