Yaskawa SGDB - Manual (Page 225)

USING THE DIGITAL OPERATOR
4.2.6 Clearing Alarm Trace-back Data cont.
214
For JUSP-OP03A
1. Press
MODE/SET
to select the parameter setting
mode.
2. Press the
UP
and
DOWN
keys to select the pa-
rameter number Cn-00.
(Parameter Cn-00 is selected when the power
is turned ON.)
3. Press
DATA
to display the current data for the pa-
rameter Cn-00.
4. Press the
UP
and
DOWN
keys to change the data
to 02.
5. Press
MODE/SET
to clear the alarm trace-back
data.
6. Press
DATA
to return to the parameter number
display.
4
JUSP-OP03A
Setting Mode
Select Cn-00.
Parameter Number Data
Set to 00-02.
Value changes
rapidly when
key held down.
Clear the alarm trace-back data.
Parameter Number Data