Yaskawa SGDB User Manual
Page 571
Advertising
565
Parame-
ter No.
Bit
No.
Setting
Factory
Setting
Encoder selec-
i
Cn-01
E
0
1
*2
tion
Uses incremental encoder.
Uses absolute encoder.
Reserved
F
Reserved : Setting = 0 (do not change the setting)
0
: Parameters must be set and checked before turning the motor power ON.
*1 less than or equal to 1.5 kW : 1
greater than or equal to 2.0 kW : 0
*2 If Applicable motor is SGMG, SGMS, SGM, SGMP type : 0
SGMD type : 1
NOTE
For the Cn-01 memory switch, always turn the power OFF, then ON after changing the set-
ting. This makes the new setting valid.
C
Advertising