Yaskawa SGDB User Manual
Page 236
Advertising
USING THE DIGITAL OPERATOR
5.1.1 Selecting a Servomotor cont.
226
SGMj-jjjjjA _ _
Gravity load + oil
End servomotor selection
From previous page (A)
5) Select shaft specification
6) Selection option specification
Straight without key
Straight with key (with end-shaft tap)
Taper 1/10 with parallel key
Taper 1/10 with Woodruff key
(for G Series 05 and 09 only)
SGMj-jjjjjB _ _
SGMj-jjjjjC _ _
SGMj-jjjjjD _ _
Oil is used at shaft end
Under gravity
SGMj-jjjjjjB _
SGMj-jjjjjjC _
SGMj-jjjjjjS _
SGMj-jjjjjjF _
SGMj-jjjjjjG _
With 90 VDC brake
With 24 VDC brake
With shaft seal
With shaft seal and
90 VDC brake
With shaft seal and
24 VDC brake
Normally, the last
column is left blank.
5
Advertising