1 selecting a sigma-series servo, 1 selecting a servomotor, 1 selecting a σ -series servo – Yaskawa SGDB User Manual
Page 233
Advertising
5.1 Selecting a Σ -Series Servo
223
5.1
Selecting a Σ-Series Servo
This section describes how to select the Σ-Series servomotor, SERVOPACK, and Digital Op-
erator.
5.1.1 Selecting a Servomotor
Select an SGMG (1000 or 1500 min
−1
), SGMS, or SGMD servomotor according to the
servo system to be used. Each type can be identified as eight-digit alphanumeric charac-
ters following “SGMG-”, “SGMS-” or “SGMD-”. Numbers 1) to 6) shown in the following
figure correspond to the numbers in the flowchart for servomotor selection on the follow-
ing pages.
J
Selecting an SGMG, SGMS, or SGMD Servomotor
The following pages provide an explanation of Σ-Series Servomotor models and selec-
tion flowcharts.
5
Advertising