Yaskawa SGDB User Manual
Page 407
5.4 Σ -Series Dimensional Drawings
397
*1 The SGMG-55AjA, -75AjA, -1AAjA, -1EAjA, -44AjB, and -60AjB motors do
not contain an End Bell. For these motors, use the following flexible conduit instead.
Connector
Conduit Type
Manufacturer
Angle
(L-Shaped)
Straight
yp
RCC-3::RL-MS32F
RCC-1::RL-MS32F
VF-:: (SR-::)
Nippon Flex Co., Ltd.
Select an appropriate connector and conduit type (mark ::) according to the lead wire di-
ameter. For details, refer to page 430.
Note
1) The connectors for a detector are the same regardless of the motor type being used.
2) To ensure compliance with IP67, always use the plug, End Bell, Back Shell and cable
clamp specified above.
3) Select an appropriate cable clamp type (mark::) according to the lead wire diameter.
For details, refer to page 430.
4) ( ) in the receptacle column shows the standard (non-dripproof) type. However, both are
actually the same receptacles.
5